How To Fix a Red Screen of Death on a Computer or Laptop?

So the video signaling of your computer has become faulty and displays red tints or a red screen. The problem may be with your monitor, and in many cases, the problem is caused by a faulty monitor cable. The steps to fix the red screen on your Computer are provided below:

Steps to Fix Red Screen of Death on a Computer

You can fix the red tint displaying on your screen by following some simple steps provided below:

Step 1

Rebooting your computer is the first step and a general fix for any issue arising on your computer.

Step 2

Twist and turn the monitor cable on both ends of the connections and check if the tint is visible or not. Problems may be arising due to an unaligned connection. Finally, disconnect and reconnect the cables and check if the problem is resolved.

Step 3

Factory Reset your LCD monitor, as the process varies between different models, refer to the manufacturer’s instructions.

Step 4

Check for any port damage, check for bent or missing pins in the cable. If you found any bent connector pin, use the screwdriver to straighten and re-align the pin. Try reconnecting the cable, still not fixed, check another step.

Step 6

Use alternative ports available for your monitor. Use additional ports such as use the DVI port instead of using HDMI.

Step 7

If you are using any converter or bypassing device, remove or replace them as it might be faulty.

Step 8

Check if any magnetic device is nearby, Monitors can display incorrectly when exposed to interference.

Step 9

There may be a fault within the cable you are using. Replace your old HDMI, DVI, or VGA cable.

Step 10

Connect your Monitor with any different computer. If your monitor is still displaying a red screen of death, then your monitor has some problem. If not then the graphics card of your original PC is faulty.